armored concrete

简明释义

钢筋混凝土

英英释义

Armored concrete refers to a type of concrete that is reinforced with steel bars or mesh to enhance its tensile strength and durability, making it suitable for structures that require additional protection against impact or stress.

装甲混凝土是指一种通过钢筋或钢网增强其抗拉强度和耐久性的混凝土,适用于需要额外保护以抵御冲击或应力的结构。

例句

1.The parking garage was reinforced with armored concrete to prevent damage from heavy vehicles.

停车场用装甲混凝土加固,以防止重型车辆造成损坏。

2.The military facility is protected by walls made of armored concrete.

军事设施由装甲混凝土制成的墙壁保护。

3.Using armored concrete can significantly increase the lifespan of a structure.

使用装甲混凝土可以显著延长结构的使用寿命。

4.Engineers recommend armored concrete for buildings located in earthquake-prone areas.

工程师建议在地震多发地区的建筑中使用装甲混凝土

5.The new bridge was constructed using armored concrete to withstand severe weather conditions.

这座新桥采用了装甲混凝土建造,以抵御恶劣的天气条件。

作文

In the field of construction and civil engineering, the term armored concrete refers to a type of concrete that is reinforced with steel or other materials to enhance its strength and durability. This innovative building material plays a crucial role in modern architecture, where the demand for robust and resilient structures is ever-increasing. The concept of armored concrete can be traced back to the early 20th century, when engineers began to realize that combining concrete with steel could yield superior results compared to using either material alone.Concrete is known for its compressive strength, which allows it to withstand heavy loads. However, it is relatively weak in tension, meaning it can crack or fail under tensile stress. To address this limitation, armored concrete incorporates steel reinforcement bars (rebar) within the concrete mix. These bars provide tensile strength, allowing the structure to endure various forces and stresses without compromising its integrity.The use of armored concrete has revolutionized the construction industry. Buildings, bridges, and other infrastructures utilize this composite material to ensure safety and longevity. For instance, skyscrapers rely heavily on armored concrete for their foundations and core structures, enabling them to reach impressive heights while maintaining stability.Moreover, armored concrete is not only limited to traditional construction methods. With advancements in technology, new forms of armored concrete have emerged, such as fiber-reinforced concrete and ultra-high-performance concrete (UHPC). These modern variants offer enhanced properties, including increased resistance to environmental factors, improved ductility, and reduced weight, making them suitable for a wider range of applications.One of the key benefits of armored concrete is its versatility. It can be molded into various shapes and sizes, allowing architects and engineers to explore creative designs without compromising structural integrity. Additionally, armored concrete can be used in a variety of settings, from residential buildings to industrial facilities, and even in military applications where blast resistance is crucial.Despite its numerous advantages, the production and use of armored concrete also come with challenges. The extraction of raw materials, such as cement and aggregates, contributes to environmental degradation and carbon emissions. Therefore, researchers are continuously exploring sustainable alternatives, such as recycled materials and eco-friendly additives, to minimize the environmental impact of armored concrete production.In conclusion, armored concrete is an essential component of modern construction, providing the necessary strength and resilience to meet the demands of contemporary architectural designs. As technology continues to advance, the evolution of armored concrete will likely lead to even more innovative solutions that balance performance with sustainability. Understanding the significance of armored concrete not only enhances our appreciation for engineering marvels but also emphasizes the importance of responsible construction practices in preserving our environment for future generations.

在建筑和土木工程领域,术语armored concrete指的是一种通过钢铁或其他材料增强其强度和耐久性的混凝土。这种创新的建筑材料在现代建筑中发挥着至关重要的作用,因为对坚固和耐用结构的需求日益增加。armored concrete的概念可以追溯到20世纪初,当时工程师们开始意识到将混凝土与钢材结合使用可以获得比单独使用任何一种材料更优越的效果。混凝土以其抗压强度而闻名,这使其能够承受重负荷。然而,它在抗拉方面相对较弱,这意味着在拉伸应力下可能会出现裂缝或失效。为了解决这一局限性,armored concrete在混凝土中加入了钢筋(rebar)。这些钢筋提供了抗拉强度,使结构能够承受各种力和应力而不影响其完整性。armored concrete的使用彻底改变了建筑行业。建筑物、桥梁和其他基础设施利用这种复合材料来确保安全和持久。例如,摩天大楼在其基础和核心结构中大量依赖armored concrete,使其能够在保持稳定的同时达到令人印象深刻的高度。此外,armored concrete不仅限于传统的建筑方法。随着技术的进步,新型armored concrete不断涌现,例如纤维增强混凝土和超高性能混凝土(UHPC)。这些现代变体提供了增强的特性,包括对环境因素的更强抵抗力、改善的延展性和减轻的重量,使其适用于更广泛的应用。armored concrete的一个关键好处是其多功能性。它可以模塑成各种形状和大小,允许建筑师和工程师在不妨碍结构完整性的情况下探索创造性的设计。此外,armored concrete可以在多种环境中使用,从住宅建筑到工业设施,甚至在军事应用中,爆炸抗性至关重要。尽管有许多优点,armored concrete的生产和使用也面临挑战。原材料(如水泥和骨料)的提取会导致环境退化和碳排放。因此,研究人员不断探索可持续的替代品,例如回收材料和环保添加剂,以最小化armored concrete生产对环境的影响。总之,armored concrete是现代建筑的重要组成部分,提供了必要的强度和韧性,以满足当代建筑设计的需求。随着技术的不断进步,armored concrete的演变可能会导致更多创新解决方案的出现,这些方案平衡了性能与可持续性。理解armored concrete的重要性不仅增强了我们对工程奇迹的欣赏,也强调了在保护我们环境以造福未来世代方面负责任的建筑实践的重要性。

相关单词

concrete

concrete详解:怎么读、什么意思、用法