allowable maximum torque

简明释义

许用最大扭矩

英英释义

例句

1.The manufacturer specified the allowable maximum torque (允许的最大扭矩) for the bolts to prevent material failure.

制造商规定了螺栓的允许的最大扭矩以防止材料失效。

2.When tightening the screws, always adhere to the allowable maximum torque (允许的最大扭矩) to avoid damage.

在拧紧螺丝时，始终遵循允许的最大扭矩以避免损坏。

3.During testing, we measured the allowable maximum torque (允许的最大扭矩) to ensure safety standards were met.

在测试过程中，我们测量了允许的最大扭矩以确保符合安全标准。

4.The design engineer calculated the allowable maximum torque (允许的最大扭矩) for the gearbox to ensure optimal performance.

设计工程师计算了变速箱的允许的最大扭矩以确保最佳性能。

5.The engine's performance can be optimized by ensuring that the output does not exceed the allowable maximum torque (允许的最大扭矩).

通过确保输出不超过允许的最大扭矩，可以优化发动机的性能。

作文

Understanding the concept of allowable maximum torque is crucial in various engineering applications, particularly in mechanical and structural design. Torque, in essence, is a measure of the rotational force applied to an object. The term allowable maximum torque refers to the highest level of torque that a component can withstand without experiencing failure or permanent deformation. This concept is vital for ensuring the safety and reliability of mechanical systems.In mechanical engineering, components such as bolts, gears, and shafts are often subjected to significant torque during operation. For instance, when tightening a bolt, it is essential to apply the right amount of torque to ensure a secure fit without exceeding its allowable maximum torque. Exceeding this limit can lead to stripping the threads or even breaking the bolt, which could compromise the integrity of the entire assembly.The determination of allowable maximum torque involves several factors, including the material properties, dimensions of the component, and the type of loading conditions it will encounter. Engineers typically refer to material specifications and design codes that provide guidelines on the maximum allowable torque for different materials and geometries. These specifications help in selecting the appropriate components for specific applications, ensuring that they can handle the expected loads.Moreover, the allowable maximum torque is not a fixed value; it can vary based on environmental conditions such as temperature and humidity. For example, certain materials may become more brittle at lower temperatures, thereby reducing their ability to withstand torque. Therefore, engineers must consider these variables when designing systems that will operate under varying conditions.In automotive engineering, the concept of allowable maximum torque is particularly relevant. Engine components, such as crankshafts and connecting rods, experience high levels of torque during operation. Manufacturers specify the allowable maximum torque for these components to prevent catastrophic failures that could result from excessive stress. For instance, if a car engine is tuned to produce more power than what the components can handle, it may lead to engine failure. Thus, understanding and adhering to the allowable maximum torque is essential for performance and safety.In conclusion, the allowable maximum torque is a fundamental concept in engineering that ensures the safe and efficient operation of mechanical systems. It is essential for engineers to accurately calculate and apply this parameter in their designs to avoid failures and maintain the integrity of structures and machines. By understanding the limits imposed by allowable maximum torque, engineers can create reliable systems that perform optimally under various conditions, ultimately leading to safer and more efficient technologies.

理解允许的最大扭矩的概念对于各种工程应用至关重要，特别是在机械和结构设计中。扭矩本质上是施加于物体的旋转力的量度。术语允许的最大扭矩指的是组件在不发生故障或永久变形的情况下能够承受的最高扭矩水平。这个概念对于确保机械系统的安全性和可靠性至关重要。在机械工程中，螺栓、齿轮和轴等组件在操作过程中常常会受到显著的扭矩。例如，在拧紧螺栓时，施加适当的扭矩以确保安全配合而不超过其允许的最大扭矩是至关重要的。超过这个限度可能导致螺纹剥离甚至螺栓断裂，这可能会危及整个装配的完整性。允许的最大扭矩的确定涉及多个因素，包括材料特性、组件的尺寸以及它将遇到的加载条件类型。工程师通常参考材料规格和设计规范，这些规范提供了不同材料和几何形状的最大允许扭矩的指导。这些规范有助于选择适合特定应用的组件，确保它们能够承受预期的负载。此外，允许的最大扭矩并不是一个固定值；它可能会根据环境条件如温度和湿度而变化。例如，某些材料在低温下可能变得更加脆弱，从而降低其承受扭矩的能力。因此，工程师在设计将在不同条件下运行的系统时，必须考虑这些变量。在汽车工程中，允许的最大扭矩的概念尤其相关。发动机组件，如曲轴和连杆，在操作过程中会经历高水平的扭矩。制造商为这些组件指定了允许的最大扭矩，以防止由于过度应力而导致的灾难性故障。例如，如果一辆汽车发动机被调校以产生超出组件承受能力的功率，可能会导致发动机故障。因此，理解和遵循允许的最大扭矩对性能和安全至关重要。总之，允许的最大扭矩是工程中的一个基本概念，确保机械系统的安全和高效运行。工程师必须准确计算和应用这一参数，以避免故障并保持结构和机器的完整性。通过理解允许的最大扭矩所施加的限制，工程师可以创建可靠的系统，在各种条件下都能最佳运行，最终导致更安全和更高效的技术。