admissible length

简明释义

可容许长度

英英释义

例句

1.For this essay, the admissible length is between 1000 and 1500 words.

对于这篇论文，可接受的长度在1000到1500字之间。

2.The document must not exceed the admissible length of 10 pages to be considered for submission.

文件的长度不得超过可接受的长度，以便被考虑提交。

3.Please ensure that your presentation slides adhere to the admissible length of 15 slides.

请确保你的演示文稿遵循可接受的长度为15张幻灯片。

4.The report was rejected because it exceeded the admissible length specified by the committee.

该报告被拒绝，因为它超出了委员会规定的可接受的长度。

5.In this competition, the admissible length for each entry is set at 500 words.

在这次比赛中，每个参赛作品的可接受的长度设定为500字。

作文

In the field of engineering and construction, the term admissible length plays a crucial role in determining the feasibility and safety of various structures. The admissible length refers to the maximum allowable length of a structural element, such as beams or columns, without compromising its integrity or leading to failure under specified loads. Understanding this concept is vital for engineers as it directly impacts the design and functionality of buildings and other infrastructures.When designing a structure, engineers must consider various factors, including the materials used, the load that will be applied, and environmental conditions. The admissible length is influenced by these factors, as different materials have different strength characteristics. For instance, steel has a higher tensile strength compared to wood, allowing for longer spans in construction. Consequently, determining the admissible length helps engineers optimize the use of materials while ensuring safety and performance.Moreover, the admissible length is not only about the length itself but also involves the distribution of loads across the structure. Engineers utilize mathematical models and simulations to analyze how forces are transmitted through various elements. By calculating the admissible length, they can ensure that the structure can withstand both static and dynamic loads, such as those caused by wind or earthquakes.In practical applications, the admissible length has significant implications for cost efficiency and resource management. Structures designed with optimal lengths can reduce material waste and lower construction costs. For example, if an engineer knows the admissible length for a beam, they can choose the appropriate size and type of material, which can lead to more sustainable building practices. This consideration is increasingly important in today’s world, where environmental concerns are at the forefront of construction practices.Furthermore, understanding the admissible length is essential for complying with building codes and regulations. Most jurisdictions have specific guidelines that dictate the maximum allowable lengths for various structural components. By adhering to these regulations, engineers can avoid legal issues and ensure the safety of the structures they design. Failure to observe the admissible length can result in catastrophic failures, leading to injuries, loss of life, and significant financial repercussions.In conclusion, the concept of admissible length is fundamental in the fields of engineering and construction. It encompasses a range of considerations, from material properties and load distribution to cost efficiency and regulatory compliance. By mastering the principles surrounding admissible length, engineers can design safer, more efficient structures that meet the needs of society while adhering to environmental and safety standards. As technology advances and new materials are developed, the understanding of admissible length will continue to evolve, shaping the future of construction and engineering practices.

在工程和建筑领域，术语admissible length在确定各种结构的可行性和安全性方面发挥着至关重要的作用。admissible length指的是结构元素（如梁或柱）的最大允许长度，在不影响其完整性或在规定负载下导致失效的情况下。理解这一概念对工程师至关重要，因为它直接影响建筑物和其他基础设施的设计和功能。在设计结构时，工程师必须考虑多种因素，包括所用材料、施加的负载和环境条件。admissible length受这些因素的影响，因为不同材料具有不同的强度特性。例如，钢的抗拉强度高于木材，因此在建筑中可以使用更长的跨度。因此，确定admissible length有助于工程师优化材料的使用，同时确保安全和性能。此外，admissible length不仅仅是长度本身，还涉及到负载在结构中的分布。工程师利用数学模型和模拟来分析各种元素如何传递力。通过计算admissible length，他们可以确保结构能够承受静态和动态负载，例如风或地震引起的负载。在实际应用中，admissible length对成本效率和资源管理具有重要意义。设计出最佳长度的结构可以减少材料浪费并降低施工成本。例如，如果工程师知道某根梁的admissible length，他们可以选择合适的尺寸和材料类型，从而导致更可持续的建筑实践。考虑到这一点，在当今世界，环境问题已成为建筑实践的重点。此外，理解admissible length对于遵守建筑规范和法规至关重要。大多数地区都有具体的指南，规定各种结构组件的最大允许长度。通过遵循这些规定，工程师可以避免法律问题，确保他们设计的结构的安全性。如果未能遵守admissible length，可能会导致灾难性的失败，造成伤害、生命损失和重大财务损失。总之，admissible length的概念在工程和建筑领域是基础性的。它涵盖了一系列考虑因素，从材料特性和负载分布到成本效率和法规遵从性。通过掌握与admissible length相关的原则，工程师可以设计出更安全、更高效的结构，满足社会的需求，同时遵循环境和安全标准。随着技术的进步和新材料的发展，对admissible length的理解将继续发展，塑造建筑和工程实践的未来。