bond peel

简明释义

键合处剥离

英英释义

例句

1.The report highlighted the risks associated with 粘合剥离 in high-temperature environments.

报告强调了高温环境中与粘合剥离相关的风险。

2.To prevent 粘合剥离, ensure that surfaces are clean and dry before application.

为了防止粘合剥离，确保在施胶前表面干净且干燥。

3.The technician demonstrated how to properly handle 粘合剥离 during the installation process.

技术员演示了如何在安装过程中正确处理粘合剥离。

4.During testing, we observed significant 粘合剥离 at the joint after prolonged exposure.

在测试中，我们观察到长时间暴露后接头处出现明显的粘合剥离。

5.When applying the adhesive, make sure to avoid any areas where the 粘合剥离 could occur.

在应用粘合剂时，确保避免任何可能发生的粘合剥离区域。

作文

In the realm of materials science, the term bond peel refers to a specific type of mechanical failure that occurs at the interface of two bonded materials. This phenomenon is particularly relevant in adhesive applications, where two surfaces are joined together using a bonding agent. Understanding bond peel is crucial for engineers and designers who work with composite materials, as it can significantly affect the performance and longevity of a product.When two materials are bonded together, they form a strong interface that is intended to withstand various forces during use. However, under certain conditions, this bond can fail due to peeling. The bond peel failure mode is characterized by the separation of the bonded layers, which can occur when tensile or shear forces are applied perpendicular to the bond line. This is particularly important in applications where materials are subjected to dynamic loads or environmental factors that may weaken the adhesive over time.To illustrate the significance of bond peel, consider the automotive industry, where adhesives are commonly used to assemble components such as windshields and body panels. If a bond fails due to peeling, it can lead to safety hazards, structural integrity issues, and costly repairs. Engineers must conduct thorough testing to evaluate the peel strength of adhesives used in these applications to ensure they can withstand the stresses encountered during vehicle operation.Moreover, the concept of bond peel is not limited to industrial applications; it can also be observed in everyday life. For instance, when peeling off a sticker from a surface, one might notice that the adhesive does not always come off cleanly. This is an example of bond peel in action, where the adhesive bond between the sticker and the surface fails, leading to incomplete removal and potential residue left behind.To mitigate the risks associated with bond peel, manufacturers often employ various strategies. These may include selecting appropriate adhesive formulations, optimizing surface preparation techniques, and designing joints that minimize stress concentrations. Additionally, advancements in material science continue to enhance our understanding of adhesion mechanisms, enabling the development of stronger and more reliable bonding solutions.In conclusion, the term bond peel encapsulates a critical aspect of adhesive technology and material performance. Whether in high-stakes industries like aerospace and automotive or in simple everyday tasks, the principles governing bond peel play a vital role in ensuring the effectiveness and reliability of bonded assemblies. By recognizing and addressing the challenges posed by bond peel, we can improve product design and enhance safety across various applications.

在材料科学领域，术语bond peel指的是两种粘合材料界面发生的一种特定类型的机械失效。这种现象在粘合应用中尤为相关，其中两个表面通过粘合剂连接在一起。理解bond peel对从事复合材料工作的工程师和设计师至关重要，因为它可以显著影响产品的性能和使用寿命。当两种材料粘合在一起时，它们形成一个强大的界面，旨在承受使用过程中的各种力量。然而，在某些条件下，由于剥离，这种粘合可能会失效。bond peel失效模式的特点是粘合层的分离，当施加垂直于粘合线的拉伸或剪切力时，可能会发生这种情况。这在材料受到动态载荷或可能随着时间推移而削弱粘合剂的环境因素影响的应用中尤其重要。为了说明bond peel的重要性，可以考虑汽车工业，在该行业中，粘合剂通常用于组装风挡玻璃和车身面板。如果由于剥离而导致粘合失效，可能会导致安全隐患、结构完整性问题和昂贵的维修费用。工程师必须进行彻底的测试，以评估在这些应用中使用的粘合剂的剥离强度，以确保它们能够承受车辆运行过程中遇到的应力。此外，bond peel的概念并不限于工业应用；在日常生活中也可以观察到。例如，当从表面剥离贴纸时，人们可能会注意到粘合剂并不总是干净地脱落。这是bond peel作用的一个例子，其中贴纸与表面之间的粘合力失效，导致不完全去除和潜在的残留物。为了降低与bond peel相关的风险，制造商通常采用多种策略。这些策略可能包括选择适当的粘合剂配方、优化表面处理技术以及设计最小化应力集中点的接头。此外，材料科学的进步继续增强我们对粘附机制的理解，从而促进更强大和更可靠的粘合解决方案的发展。总之，术语bond peel概括了粘合技术和材料性能的一个关键方面。无论是在航空航天和汽车等高风险行业，还是在简单的日常任务中，支配bond peel的原则在确保粘合组件的有效性和可靠性方面发挥着重要作用。通过识别和解决bond peel所带来的挑战，我们可以改善产品设计，提高各类应用中的安全性。