wear limit

简明释义

磨损极限

英英释义

例句

1.The mechanic explained that the wear limit 磨损极限 for the brake pads is 3 millimeters.

技师解释说，刹车片的磨损极限 磨损极限是3毫米。

2.Before replacing the tires, check the wear limit 磨损极限 to ensure safety.

在更换轮胎之前，请检查磨损极限 磨损极限以确保安全。

3.If the wear limit 磨损极限 is exceeded, it could lead to serious mechanical failure.

如果超过了磨损极限 磨损极限，可能会导致严重的机械故障。

4.The manufacturer recommends measuring the wear limit 磨损极限 of the engine components regularly.

制造商建议定期测量发动机部件的磨损极限 磨损极限。

5.The technician noted that the wear limit 磨损极限 for the clutch plate had been reached.

技术员指出，离合器片的磨损极限 磨损极限已经达到。

作文

Understanding the concept of wear limit is essential in various fields, especially in engineering and manufacturing. The term refers to the maximum amount of wear that a component can endure before it becomes ineffective or unsafe for use. Knowing the wear limit of materials helps engineers design more reliable products and ensures safety in operations. For example, in the automotive industry, brake pads have a specific wear limit that indicates when they need to be replaced. If the pads are worn beyond this limit, they may fail to provide adequate stopping power, which could lead to accidents. In mechanical systems, components such as gears and bearings also have defined wear limits. Regular maintenance checks are crucial to monitor the condition of these parts. If the wear exceeds the wear limit, it can lead to catastrophic failures, resulting in costly repairs and potentially dangerous situations. Therefore, understanding and adhering to the wear limit is vital for the longevity and reliability of machinery.Moreover, industries like aviation take the wear limit very seriously. Aircraft components undergo rigorous testing to determine their wear limits. Engineers must ensure that every part of the aircraft remains within safe operating conditions. If a part wears down past its wear limit, it could jeopardize the safety of the flight and everyone on board. Thus, strict regulations and maintenance schedules are in place to prevent such occurrences.The concept of wear limit also extends to consumer products. For instance, the soles of shoes have a wear limit that, when exceeded, can lead to discomfort or even injury. Manufacturers often provide guidelines on how long a product should last under normal use, helping consumers make informed decisions about when to replace items. This not only enhances user experience but also promotes safety.In conclusion, the wear limit is a critical aspect of design and maintenance across various industries. It ensures that components function effectively and safely throughout their intended lifespan. By understanding the wear limit, engineers and consumers alike can make better choices, leading to safer and more efficient products. The importance of monitoring and respecting the wear limit cannot be overstated, as it plays a key role in preventing failures and ensuring the overall safety of equipment and users alike.

理解磨损极限的概念在各个领域中至关重要，尤其是在工程和制造业。这个术语指的是一个部件在失去效能或变得不安全之前能够承受的最大磨损量。了解材料的磨损极限有助于工程师设计更可靠的产品，并确保操作的安全。例如，在汽车工业中，刹车片有一个特定的磨损极限，指示何时需要更换。如果刹车片磨损超过这个极限，它们可能无法提供足够的制动能力，从而导致事故。在机械系统中，齿轮和轴承等部件也有明确的磨损极限。定期的维护检查对于监测这些部件的状态至关重要。如果磨损超过了磨损极限，可能会导致灾难性的故障，造成昂贵的维修费用和潜在的危险情况。因此，理解和遵守磨损极限对于机械的长寿和可靠性至关重要。此外，航空等行业对磨损极限非常重视。飞机部件经过严格测试以确定其磨损极限。工程师必须确保飞机的每个部件都保持在安全操作条件下。如果某个部件磨损超过其磨损极限，可能会危及飞行安全及机上所有人员的生命。因此，制定严格的法规和维护计划以防止这种情况发生。磨损极限的概念还延伸到消费品。例如，鞋子的鞋底有一个磨损极限，如果超过这个极限，可能会导致不适甚至受伤。制造商通常提供关于产品在正常使用下应持续多长时间的指导，帮助消费者做出明智的更换决定。这不仅提升了用户体验，还促进了安全性。总之，磨损极限是各个行业设计和维护的关键方面。它确保组件在预期使用寿命内有效且安全地运行。通过了解磨损极限，工程师和消费者都可以做出更好的选择，从而导致更安全、更高效的产品。监测和尊重磨损极限的重要性不容忽视，因为它在防止故障和确保设备及用户整体安全中发挥着关键作用。