soldered seam

简明释义

钎焊焊缝

英英释义

例句

1.The engineer recommended reinforcing the soldered seam to prevent future breakage.

工程师建议加固焊接接缝以防止未来的断裂。

2.If the soldered seam is not properly made, it can lead to circuit failure.

如果焊接接缝没有正确制作，可能会导致电路故障。

3.The technician inspected the soldered seam for any defects before proceeding with the assembly.

技术人员在继续组装之前检查了焊接接缝是否有缺陷。

4.During the quality control check, the soldered seam was found to be incomplete.

在质量控制检查中，发现焊接接缝不完整。

5.A strong soldered seam is crucial for ensuring the durability of electronic devices.

坚固的焊接接缝对确保电子设备的耐用性至关重要。

作文

In the world of manufacturing and construction, the integrity of materials is paramount. One of the most critical aspects that ensure strength and durability in metalwork is the use of joints and seams. Among these, the soldered seam (焊接缝) stands out as a reliable method for joining metal components. A soldered seam involves the process of melting a filler metal, known as solder, to create a bond between two or more pieces of metal. This technique is prevalent in various industries, including electronics, plumbing, and jewelry making.The process of creating a soldered seam begins with preparing the surfaces to be joined. It is essential to clean the metals thoroughly to remove any oxidation, grease, or contaminants that could weaken the bond. Once the surfaces are prepared, the solder is heated until it reaches its melting point. The molten solder is then applied to the joint, filling the gap between the metal pieces. As the solder cools, it solidifies, forming a strong connection that can withstand significant stress.One of the primary advantages of using a soldered seam is its ability to create a watertight seal. This property makes it particularly valuable in plumbing applications, where leaks can lead to severe damage and costly repairs. Additionally, the soldered seam is less likely to fail under thermal expansion and contraction compared to other joining methods, such as welding, which can be crucial in environments with fluctuating temperatures.In the electronics industry, soldered seams are vital for assembling circuit boards. Components are attached to the board using solder, ensuring that electrical connections are secure and reliable. The precision required in this application highlights the importance of mastering the soldered seam technique, as even minor imperfections can lead to faulty devices or complete system failures.Moreover, the aesthetic appeal of a soldered seam cannot be overlooked, especially in jewelry making. Artisans often use soldering techniques to create intricate designs and patterns, enhancing the visual appeal of their creations. The smooth finish of a well-executed soldered seam can elevate the overall quality of a piece, making it more desirable to consumers.However, it is essential to note that the effectiveness of a soldered seam largely depends on the skill of the person performing the soldering. Poor technique can result in weak joints, which may fail under stress. Therefore, proper training and practice are crucial for anyone looking to master this skill. There are various types of solder available, each suited for specific applications, and understanding these differences is also vital for achieving optimal results.In conclusion, the soldered seam (焊接缝) is a fundamental aspect of metalworking that offers numerous benefits across various industries. Its ability to create strong, durable, and aesthetically pleasing joints makes it an invaluable technique for manufacturers and artisans alike. Whether in plumbing, electronics, or jewelry making, the importance of mastering the soldered seam cannot be overstated. As technology continues to advance, the methods and materials used in soldering will evolve, but the core principles of creating a strong bond through a soldered seam will remain essential for years to come.

在制造和建筑的世界中，材料的完整性至关重要。确保金属加工强度和耐久性的最关键方面之一是接头和缝合的使用。在这些接头中，soldered seam（焊接缝）作为连接金属部件的可靠方法脱颖而出。soldered seam涉及熔化一种称为焊料的填充金属，以在两个或多个金属片之间形成一个结合。这种技术在电子、管道和珠宝制作等多个行业中广泛应用。创建soldered seam的过程始于准备要连接的表面。彻底清洁金属以去除任何氧化物、油脂或污染物，这对增强结合力至关重要。一旦表面准备好，焊料就会加热到其熔点。然后将熔化的焊料应用于接头，填补金属片之间的间隙。当焊料冷却时，它会固化，形成一个能够承受相当大压力的强连接。使用soldered seam的主要优点之一是其能够创建防水密封。这一特性使其在管道应用中特别有价值，因为泄漏可能导致严重损坏和昂贵的维修。此外，与其他连接方法（如焊接）相比，soldered seam不太可能因热膨胀和收缩而失效，这在温度波动的环境中尤为重要。在电子行业，soldered seams对于组装电路板至关重要。组件通过焊接连接到电路板上，确保电气连接安全可靠。这一应用中所需的精确性凸显了掌握soldered seam技术的重要性，因为即使是微小的缺陷也可能导致设备故障或整个系统失效。此外，尤其在珠宝制作中，soldered seam的美观性也不可忽视。工匠们常常使用焊接技术来创造复杂的设计和图案，增强他们作品的视觉吸引力。经过良好执行的soldered seam的光滑表面可以提升作品的整体质量，使其对消费者更具吸引力。然而，必须注意的是，soldered seam的有效性在很大程度上取决于进行焊接的人所具备的技能。糟糕的技术可能导致接头脆弱，可能在压力下失效。因此，对于任何希望掌握这一技能的人来说，适当的培训和实践至关重要。市场上有各种类型的焊料，每种焊料适用于特定的应用，了解这些差异对于实现最佳结果也至关重要。总之，soldered seam（焊接缝）是金属加工的基本方面，在各个行业中提供了众多好处。它能够创建强大、耐用且美观的接头，使其成为制造商和工匠不可或缺的技术。无论是在管道、电子还是珠宝制作中，掌握soldered seam的重要性都不容低估。随着技术的不断进步，焊接中使用的方法和材料将不断演变，但通过soldered seam创建强大结合的核心原则在未来几年中仍将是必不可少的。