normal operating limit

简明释义

正常运转范围

英英释义

例句

1.Regular maintenance helps ensure that equipment stays within its normal operating limit.

定期维护有助于确保设备保持在其正常操作限制内。

2.If the temperature goes beyond the normal operating limit, the system will trigger an alarm.

如果温度超过正常操作限制，系统将触发警报。

3.The machine was shut down because it exceeded the normal operating limit.

机器因超过正常操作限制而被关闭。

4.Operators must monitor the normal operating limit to ensure safety.

操作员必须监控正常操作限制以确保安全。

5.The technician adjusted the settings to bring the performance back within the normal operating limit.

技术人员调整了设置，使性能恢复到正常操作限制内。

作文

In the world of engineering and technology, the term normal operating limit plays a crucial role in ensuring safety and efficiency. The normal operating limit refers to the range of conditions under which a system or device is designed to operate safely without risking damage or failure. This concept is vital across various fields, including manufacturing, aviation, and even software development. Understanding the normal operating limit helps engineers and technicians maintain optimal performance while minimizing risks.For instance, consider an airplane. The normal operating limit for an aircraft includes parameters such as altitude, speed, and weight. Pilots are trained to operate within these limits to ensure the safety of passengers and crew. If an aircraft exceeds its normal operating limit, it could lead to catastrophic failures, such as engine malfunction or structural damage. Therefore, adhering to these limits is not just a guideline; it is a matter of life and death.Similarly, in manufacturing, machines are often equipped with sensors that monitor their performance against the normal operating limit. If a machine operates outside of its designated limits, it can cause defects in products or even lead to accidents. For example, if a conveyor belt runs too fast, it may not properly sort items, leading to quality control issues. By understanding and respecting the normal operating limit, manufacturers can enhance productivity while ensuring worker safety.In the realm of software development, the normal operating limit can refer to the maximum load a server can handle before experiencing performance degradation. Developers must test their systems to determine these limits and implement measures to prevent overload. For instance, during peak usage times, a website must remain functional and responsive to users. If it exceeds its normal operating limit, it may crash or slow down, resulting in a poor user experience and potential loss of revenue.Understanding the normal operating limit also involves recognizing the consequences of exceeding these limits. In many cases, organizations conduct regular maintenance checks and stress tests to ensure that their systems remain within the safe operating range. This proactive approach not only prevents failures but also extends the lifespan of equipment and systems.Moreover, the concept of normal operating limit extends beyond technical applications; it also applies to personal health and wellness. Individuals have their own normal operating limits when it comes to physical activity, stress levels, and emotional well-being. Recognizing these limits is essential for maintaining a balanced lifestyle. For example, overexerting oneself in exercise can lead to injuries, while excessive stress can result in burnout. By being aware of our normal operating limits, we can make informed decisions about our health and well-being.In conclusion, the normal operating limit is a fundamental concept that spans various disciplines, from engineering to personal health. It serves as a guideline for safe and efficient operation, helping individuals and organizations avoid potential failures and hazards. By understanding and respecting these limits, we can enhance performance, ensure safety, and improve overall quality of life. Whether in the cockpit of an airplane, on the factory floor, or in our daily lives, the normal operating limit is a principle that should never be overlooked.

在工程和技术的世界中，术语正常操作极限在确保安全和效率方面发挥着至关重要的作用。正常操作极限指的是系统或设备在设计上能够安全运行而不冒损坏或故障风险的条件范围。这个概念在制造、航空甚至软件开发等多个领域至关重要。理解正常操作极限有助于工程师和技术人员保持最佳性能，同时最小化风险。例如，考虑一架飞机。飞机的正常操作极限包括高度、速度和重量等参数。飞行员经过培训，以在这些限制内操作，以确保乘客和机组人员的安全。如果飞机超过其正常操作极限，可能会导致灾难性的故障，例如发动机故障或结构损坏。因此，遵守这些限制不仅是指导方针；这关系到生死。同样，在制造业中，机器通常配备传感器，以监测其性能是否符合正常操作极限。如果机器在指定限制之外运行，可能会导致产品缺陷，甚至导致事故。例如，如果输送带运行得太快，可能无法正确分类物品，从而导致质量控制问题。通过理解和尊重正常操作极限，制造商可以提高生产率，同时确保工人安全。在软件开发领域，正常操作极限可以指服务器在经历性能下降之前能够处理的最大负载。开发人员必须测试他们的系统，以确定这些限制并实施措施以防止过载。例如，在高峰使用时段，网站必须保持功能正常并对用户响应。如果它超过了其正常操作极限，可能会崩溃或减慢速度，从而导致用户体验不佳和潜在收入损失。理解正常操作极限还涉及认识到超出这些限制的后果。在许多情况下，组织会定期进行维护检查和压力测试，以确保其系统保持在安全操作范围内。这种主动的方法不仅可以防止故障，还可以延长设备和系统的使用寿命。此外，正常操作极限的概念不仅适用于技术应用；它也适用于个人健康和福祉。个体在体育活动、压力水平和情绪健康方面都有自己的正常操作极限。认识到这些限制对于保持平衡的生活方式至关重要。例如，过度锻炼可能导致受伤，而过度压力可能导致精疲力竭。通过意识到我们的正常操作极限，我们可以就健康和福祉做出明智的决策。总之，正常操作极限是一个基本概念，跨越各个学科，从工程到个人健康。它作为安全和有效操作的指导方针，帮助个人和组织避免潜在的故障和危险。通过理解和尊重这些限制，我们可以提高性能，确保安全，并改善整体生活质量。无论是在飞机驾驶舱、工厂车间，还是在我们的日常生活中，正常操作极限都是一个永远不应被忽视的原则。